GE30ES‑2RS is a steel‑on‑steel radial spherical plain bearing with contact seals on both sides, designed for radial and combined radial‑axial loads and to compensate for shaft misalignment. It suits heavy static, alternating and impact loads.

During mounting, apply press force evenly to bearing ring end faces only.

Never strike directly with a hammer or transmit force through spherical sliding surfaces, to avoid raceway damage. Keep seals intact and prevent dust, chips and contaminants from entering internal friction surfaces.
This bearing requires regular relubrication. Inject suitable grease via lubrication holes and annular grooves on inner and outer rings according to working conditions.

Complete running‑in before formal operation, wipe excess overflow grease.

Do not exceed the allowable tilt angle in service. Inspect lubrication status periodically; replace the bearing if abnormal noise, jamming or heavy wear occurs.

Keep storage environment dry and clean.

It has a 30 mm bore and a 47 mm outer diameter. Its steel‑on‑steel sliding contact delivers reliable heavy‑duty performance.  

The seals are fitted on both sides to protect the bearing from dust and contaminants. Relubrication holes and grooves allow convenient re‑greasing for extended service life.
This bearing compensates shaft misalignment and carries combined radial‑axial loads.

It performs well under shock and alternating loads, with a static load capacity up to 310 kN.
It is widely used in construction machinery, hydraulic cylinders and agricultural machines.

Please contact us for GE30ES‑2RS samples and quotations.

GE..ES-2RS Series:
GE15ES-2RS, GE17ES-2RS, GE20ES-2RS, GE25ES-2RS, GE30ES-2RS, GE35ES-2RS,

GE40ES-2RS, GE45ES-2RS, GE50ES-2RS, GE55ES-2RS, GE60ES-2RS, GE70ES-2RS,

GE80ES-2RS, GE90ES-2RS, GE100ES-2RS, GE110ES-2RS, GE120ES-2RS, GE140ES-2RS,

GE160ES-2RS, GE180ES-2RS, GE200ES-2RS, GE220ES-2RS, GE240ES-2RS, GE260ES-2RS, GE280ES-2RS